Why should we recycle. Essay Example

Why should we recycle. Essay The recycling process involves the collection, separation and reprocessing already used materials into new products. The process is so called because the process undergoes a severally the cycle of manufacture; production, use†¦The recycling process involves the collection, separation and reprocessing already used materials into new products. The process is so called because the process undergoes a severally the cycle of manufacture; production, use. Recycling reduces the likelihood of wasting of useful materials and the process thereof of production as well as reducing consumption of fresh raw materials. There are two major forms of recycling: salvaging and reusing. Salvaging is a waste sorting technique in which parts or materials that have intrinsic value or are hazardous in nature are collected and separated in materials recovery facilities. Reuse on the other hand is the using again of a material that had already been used (Porter, 2002).ThesisDue to rapidly dwindling resour ces it has become imperative to recycle due to the potential of recycled materials to save enormously in terms of resources required for fresh production as well as the potential of recycled materials to remain in circulation virtually for a long time.Virtually everything can be recycled. However some materials when recycled tend to loose their properties, quality or their size (like paper, cardboard) while others like steel and aluminum tend to remain the same in quantity and quality after recycling. Some of the materials that can be recycled include aluminum, waste paper, glass, steel cans, cardboard, newspapers certain plastics and many other materials. These can find their way back to the consumers in a the same form or a different ones. For example when glass is recycled, it can be remanufactured into glass containers, laundry detergent bottles, steel framing, office paper, roofing, pipes and much more (Porter, 2002).Some of the materials that are widely used and therefore offe r a very viable choice for mass recycling due to their ability to save on the cost of energy used in production of new ones are aluminium, plastics, glass and other miscellaneous wastes such as nail polish, paint thinner, batteries.AluminumIt is estimated that about 24 million tones of aluminum is produced annually in the world. Of these, it is approximated that about 29 cans are produced for every pound of aluminum produced in the U.S. (Purdue, 2003). Majority of these cans are used for beer and soft drinks (99% of beer packaging is aluminum based while 97% soft drinks are packaged in aluminum cans) but only about 40% of the cans are post-consumer recycled (Donald, 2002). Given the fact that it requires only about 5% as much energy to recycle an aluminum can than when produced from virgin ore, there would be no need for mining new ores since about 3.1 million tones of aluminum waste is generated accounting for about 1.5% of the total municipal waste of the united states. There can be a sizable amount of savings if aluminum is completely recycled (Ackerman, 1996).PlasticsPlastic is the most used material on earth. It has been established that on average, an American car contains about 300pounds of plastic of about 60 different resins, about 10% of all the earnings of a grocery store are used to buy paper and plastic packaging. Cumulatively, plastic contributes about 23.9% (by volume) of all municipal waste in the U.S. however out of these only about 0.9 million tons of plastic (accounting for 4.7% of all the plastic used) were recycled (Purdue, 2003). The amount spent on manufacturing new plastic could have been reduced had all the plastic been recycled since there is no additional cost or energy required in recycling plastics (Donald, 2002).GlassAnnually about 41 billion glass containers were produced in the U.S. alone in shades of clear (about 64% of the total), brown (23%) and green (13%) this is according to research carried out by Purdue University (Purdu e, 2003) in 1992.Glass containers are 64% clear, 23% brown, and 13% green. The glass generated a total waste of approximately 13.3 million tons of glass contributing 6.3% of total U.S municipal waste. Of these only 35% was recycled which is very low for a commodity which is said that one glass jar recycled can produce energy to power a 100watt light bulb for about four hours (Ackerman, 1996).Other miscellaneous wastesIt is this class of goods that produce most of the municipal waste of the U.S. while some of them cannot be classified under ‘recyclable’ goods, a significant amount can be salvaged or reused.The materials that end up in waste that could be better reused   include durable goods, such as television sets, refrigerators and other home electronics which contributed about   16% of the   U.S. municipal solid waste (by weight, 25.5 million tons of solid waste). The amount of energy used to make each component cannot be compared to the cost that can be incurr ed by producing a new one. Their mode of recycling can be sale by salvaging parts that can be reused (PA Department of Environmental Protection. 2008).Having looked at the various forms of materials and their benefits in terms of energy savings if they are recycled rather than produced from scratch, we can deduce that overall recycling affords the best solution to efficient use of available energy.

Maximilian Kolbe essays

Maximilian Kolbe essays His name wasn't always Maximilian. He was born the son of a poor weaver on 8/1/1984 At Zdunska Wola in Poland, and was given the baptismal name of Raymond. His parents were devout Christians with a particular devotion to Mary. In his infancy Kolbe seems to have been normally mischievous but we are told that one day, after his mother had scolded him for some mischief or other, her words took effect and brought about a radical change in the child's behavior. Later he explained this change. 'That night I asked the Mother of God what was to become of me. Then she came to me holding two crowns, one white, the other red. She asked if I was willing to accept either of these crowns. The white one meant that I should persevere in purity, and the red that I should become a martyr. I said that I would accept them both.' Thus early did the child believe and accept that he was destined for martyrdom. His belief in his dream colored all his future actions. He was received as a novice in September 1910 and with the habit he took the new name of Maximilian. From 1912 to 1915 he was in Rome studying philosophy at the Gregorian College, and from 1915 to 1919 theology at the Collegio Serafico. He was ordained in Rome on 28 April 1918. He formed several organizations to help aid the less fortunate. He did many good thing for his country and the people of his country he helped all kinds of people including Jews this resulted in him being sent to concentration camps. It is amazing to think that despite all this Fr Kolbe never lost faith in good he knew his calling and followed it whole heartedly never turning his back on those in need. Even when things seemed bleak Fr. Kolbe went on and with the help of God he helped others. I have learned much from his life and his good works. I have learned that we must trust in the good ness of God and to always try and do whats right. ...

The 19th Century Bone Wars

The 19th Century Bone Wars When most people think of the Wild West, they picture Buffalo Bill, Jesse James, and caravans of settlers in covered wagons. But for paleontologists, the American west in the late 19th century conjures up one image above all: the enduring rivalry between two of this countrys greatest fossil hunters, Othniel C. Marsh and Edward Drinker Cope. The Bone Wars, as their feud became known, stretched from the 1870s well into the 1890s, and resulted in hundreds of new dinosaur findsnot to mention reams of bribery, trickery, and outright theft, as well get to later. (Knowing a good subject when it sees one, HBO recently announced plans for a movie version of the Bone Wars starring James Gandolfini and Steve Carell; sadly, Gandolfinis sudden death has put the project in limbo.) In the beginning, Marsh and Cope were cordial, if somewhat wary, colleagues, having met in Germany in 1864 (at the time, western Europe, not the United States, was at the forefront of paleontology research). Part of the trouble stemmed from their different backgrounds: Cope was born into a wealthy Quaker family in Pennsylvania, while Marshs family in upstate New York was comparatively poor (albeit with a very rich uncle, who enters the story later). Its probable that, even then, Marsh considered Cope a bit of a dilettante, not really serious about paleontology, while Cope saw Marsh as too rough and uncouth to be a true scientist. The Fateful Elasmosaurus Most historians trace the start of the Bone Wars to 1868, when Cope reconstructed a strange fossil sent to him from Kansas by a military doctor. Naming the specimen Elasmosaurus, he placed its skull on the end of its short tail, rather than its long neck (to be fair to Cope, to that date no had ever seen an aquatic reptile with such out-of-whack proportions). When he discovered this error, Marsh (as the legend goes) humiliated Cope by pointing it out in public, at which point Cope tried to buy (and destroy) every copy of the scientific journal in which he had published his incorrect reconstruction. This makes for a good storyand the fracas over Elasmosaurus certainly contributed to the enmity between the two menbut the Bone Wars likely started on a more serious note. Cope had discovered the fossil site in New Jersey that yielded the fossil of Hadrosaurus, named by the two mens mentor, the famous paleontologist Joseph Leidy. When he saw how many bones had yet to be recovered from the site, Marsh paid the excavators to send any interesting finds to him, rather than to Cope. Cope soon found out about this gross violation of scientific decorum, and the Bone Wars began in earnest. Into the West What kicked the Bone Wars into high gear was the discovery, in the 1870s, of numerous dinosaur fossils in the American west (some of these finds were made accidentally, during excavation work for the Transcontinental Railroad). In 1877, Marsh received a letter from Colorado schoolteacher Arthur Lakes, describing the saurian bones he had found during a hiking expedition; Lakes sent sample fossils to both Marsh and (because he didn’t know if Marsh was interested) Cope. Characteristically, Marsh paid Lakes $100 to keep his discovery a secretand when he discovered that Cope had been notified, dispatched an agent west to secure his claim. Around the same time, Cope was tipped off to another fossil site in Colorado, which Marsh tried (unsuccessfully) to horn in on. By this time, it was common knowledge that Marsh and Cope were competing for the best dinosaur fossilswhich explains the subsequent intrigues centered on Como Bluff, Wyoming. Using pseudonyms, two workers for the Union Pacific Railroad alerted Marsh to their fossil finds, hinting (but not stating explicitly) that they might strike a deal with Cope if Marsh didnt offer generous terms. True to form, Marsh dispatched another agent, who made the necessary financial arrangementsand soon the Yale-based paleontologist was receiving boxcars of fossils, including the first specimens of Diplodocus, Allosaurus and Stegosaurus. Word about this exclusive arrangement soon spreadnot least because the Union Pacific employees leaked the scoop to a local newspaper, exaggerating the prices Marsh had paid for the fossils in order to bait the trap for the wealthier Cope. Soon, Cope sent his own agent westward, and when these negotiations proved unsuccessful (possibly because he wasnt willing to pony up enough money), he instructed his prospector to engage in a bit of fossil-rustling and steal bones from the Como Bluff site, right under Marshs nose. Soon afterward, fed up with Marshs erratic payments, one of the railroad men began working for Cope instead, turning Como Bluff into the epicenter of the Bone Wars. By this time, both Marsh and Cope had relocated westward, and over the next few years engaged in such hijinks as deliberately destroying uncollected fossils and fossil sites (so as to keep them out of each others hands), spying on each others excavations, bribing employees, and even stealing bones outright. According to one account, workers on the rival digs once took time out from their labors to pelt each other with stones! Next Page: The Bone Wars Get Personal Cope and Marsh, Bitter Enemies to the Last By the 1880’s, it was clear that Othniel C. Marsh was winning the Bone Wars. Thanks to the support of his wealthy uncle, George Peabody (who lent his name to the Yale Peabody Museum of Natural History), Marsh could hire more employees and open more dig sites, while Edward Drinker Cope slowly but surely fell behind. It didnt help matters that other parties, including a team from Harvard University, now joined the dinosaur gold rush. Cope continued to publish numerous papers, but, like a political candidate taking the low road, Marsh made hay out of every tiny mistake he could find. Cope soon had his opportunity for revenge. In 1884, Congress began an investigation into the U.S. Geological Survey, which Marsh had been appointed the head of a few years before. Cope recruited a number of Marshs employees to testify against their boss (who wasnt the easiest person in the world to work for), but Marsh connived to keep their grievances out of the newspapers. Cope then upped the ante: drawing on a journal he had kept for two decades, in which he meticulously listed Marshs numerous felonies, misdemeanors and scientific errors, he supplied the information to a journalist for the New York Herald, which ran a sensational series about the Bone Wars. Marsh issued a rebuttal in the same newspaper, hurling similar accusations against Cope. In the end, this public airing of dirty laundry (and dirty fossils) didnt benefit either party. Marsh was asked to resign his lucrative position at the Geological Survey, and Cope, after a brief interval of success (he was appointed head of the National Association for the Advancement of Science), was beset by poor health and had to sell off portions of his hard-won fossil collection. By the time Cope died in 1897, both men had squandered their considerable fortunes. Characteristically, though, Cope prolonged the Bone Wars even from his grave. One of his last requests was that scientists dissect his head after his death to determine the size of his brain, which he was certain would be bigger than Marshs. Wisely, perhaps, Marsh declined the challenge, and to this day, Copes unexamined head rests in storage at the University of Pennsylvania. The Bone Wars: Let History Judge As tawdry, undignified, and out-and-out ridiculous as the Bone Wars occasionally were, they had a profound effect on American paleontology. In the same way competition is good for commerce, it can also be good for science: so eager were Othniel C. Marsh and Edward Drinker Cope to one-up each other that they discovered many more dinosaurs than if theyd merely engaged in a friendly rivalry. The final tally was truly impressive: Marsh discovered 80 new dinosaur genera and species, while Cope named a more-than-respectable 56. The fossils discovered by Marsh and Cope also helped to feed the American publics increasing hunger for new dinosaurs. Each major discovery was accompanied by a wave of publicity, as magazines and newspapers illustrated the latest amazing findsand the reconstructed skeletons slowly but surely made their way to major museums, where they still reside to the present day. You might say that popular interest in dinosaurs really began with the Bone Wars, though its arguable that it would have come about naturally, without all the bad feelings! The Bone Wars had a couple of negative consequences, as well. First, paleontologists in Europe were horrified by the crude behavior of their American counterparts, which left a lingering, bitter distrust that took decades to dissipate. And second, Cope and Marsh described and reassembled their dinosaur finds so quickly that they were occasionally careless. For example, a hundred years of confusion about Apatosaurus and Brontosaurus can be traced directly back to Marsh, who put a skull on the wrong bodythe same way Cope did with Elasmosaurus, the incident that started the Bone Wars in the first place!

Mechanical vibrations Essay Example | Topics and Well Written Essays - 3000 words

Mechanical vibrations - Essay Example Electromechanical devices also create mechanical vibrations. Fig 1 shows different types of vibration that are common sources of vibrations. The for examples of the daily life vibrations. Elementary Parts of Vibrating system The vibration of the body corresponds to the release and storing of the energy. The body stores the potential energy. There should be a mean to store the kinetic energy. In spring mechanism, spring stores the potential energy and mass is the medium that converts the potential energy is the spring to kinetic energy. In the similar case of pendulum, the length of the string determines the capacity of the system to store the potential energy and the mass acts to convert the potential energy into kinetic energy (Den Hartog, 1956). The major part of any vibrating body is the damping in the vibration that gradually tends to loss the energy of the vibrating body. In some cases where vibrations are undesired damping constants are high by absorbing the vibrations or by cr eating negative oscillations. The major types of forces that are acting on a vibrating system are disturbing forces, restoring forces, inertia force, damping force. Disturbing forces are forces which act to energize the system to make vibration in the system. Inertia force is the force that makes the vibrating body to remain in motion. Damping force is the force that tends to stop the motion of the body by damping the energy of the vibrating system (Den Hartog, 1956). Fig 2 depicts the mass attached to the spring showing the vibratory motion. F depicts the force, m is the mass, L is the length of the spring. Degree of freedom refers to the coordinates available for the motion of the vibrating body. The coordinates to evaluate the instantaneous position of the system at its each part is a degree of freedom of that system. A finite degree of freedom corresponds to a discrete or lumped parameter system; while an infinite degree of freedom corresponds to a continuous or distributed syst em. Classify various types of vibration in mechanical systems. Types of Vibration in Mechanical System In any mechanical system, the vibrations are typified according to their classification. The classifications of different vibration are as follows. Classification of Vibration: Vibrations in a system or within a system can be classified as †¢ Free and forced †¢ Damped and undamped †¢ Linear and nonlinear †¢ Deterministic and Random Free vibration Consider a vibrating system that is only once disturbed by exerting an external force and then the system vibrates with any further external force or disturbance. The vibration of such system is free vibration. If the mass attached to the spring is once stretched and then the eternal force is removed, the spring mechanism shows vibration on its own, this type vibration is called free vibration. Forced Vibration: Forced vibrations refer to the type of vibrations that are due to the constant disturbance or repeating exter nal force. Car engines, generators, and other constantly moving mechanical devices produce forced vibrations (Seto, 1964). Damped Vibration Damped vibrations are due to the damping factor that makes the system to gradually loss the energy and slow down the vibration of the system. Consider the mass attached to the spring, if it is once stretched and then the external force is removed; the vibration of the mass attached to the spring will gradually slow down due to the presence of damping force (Francis, Morse &

Company analysis Essay Example | Topics and Well Written Essays - 2500 words

Company analysis - Essay Example Ans: The firm interacts with the financial markets, as a U.S. private equity firm, has bought a 48% minority interest in lululemon. The markets get the information thy need through these .the markets get the information of the company's position trough other companies feedback . Also ,lululemon athletica when announce divididends all arecatered to . Ans: This firm considers its social responsibility a very vital task; they manage their image in society, by treating their employees well. The employees are remunerated; a charge above the mini mum wage rate. Lululemon athletica offers other good services to its employees as well. This is why the goodwill of lululemon athletica circulates in the economy. Lululemon athletica has always looked at good organization and waste reduction. This is considered by them is actual elegant business. These are particularly taken care of in the production process. . Lululemon athletica is offering other good services to its employees. And so goodwill of lululemon athletica circulates within the society The programme of charitable giving is the one which actually gives the consumers back their power , their power to select from a group of locally held health charities . it is estimated that in the year 2005 lululemon athletica actully gave back almost $300,000 back to their communities . Lululemon athletica also holds , free yoga demonstration classes . further more , activties are held each year to raise funds for the department . II Stockholder analysis: Q: Who is the average investor in this stock (Individual or pension fund, taxable or tax-exempt, small or large, domestic or foreign) Ans: The individuals in this stock are the average investors; they are both small and large groups who are not exempted of taxes. Common stock and the exchangeable shares. Q: Who is the marginal investor in this stock An s: The marginal investor is the companies that are running through these plants frequently are the average investor; lululemon athletica has sold its shares upon some equity firm. They are the ones which are basically apart of the investment. IV. Measuring Investment Returns Q: Is there a typical project for this firm If yes, what would it look like in terms of life (long term or short term), investment needs and cash flow patterns Ans: This Company typically runs a specific project for the firm. This is to have maximum investment, pay the share holders more than the minimum, and pay their employees more than the minimum. This company wants to sustain over the longer term of the business. Q: How good the projects are that lululemon athletica has on its books currently Ans: They look pretty good, lululemon athletica plans to expand its franchises further more, which means more recruitments will need to take place. And alongside that they would definitely have to plan and establish departments respectively . lululemon athletica

The Physics of Bowling Essay -- Physics Bowling Papers

The Physics of Bowling The definition of physics by some may be the science that deals with matter, energy, motion, and force. Therefore everything in the world uses physics in some way or another. One of the numerous things that deal with physics is bowling. Some of the major parts of physics bowling has is the motions, the ways that Newton’s laws apply, the different momentums, and the energy. Other physics topics include torque, pendulum theory and collisions. In the motion of bowling many things are going on that apply to bowling. There is displacement, velocity, gravity, and acceleration. There is also an opposition to motion, which is friction. The displacement would be the bowling ball going from the position of leaving the hand to where it rests at the back by the pin collector. The velocity of the ball would include the speed and direction of the ball. The equation to find the velocity of the ball would be the displacement divided by the time taken to reach the destination. Gravity affects everything on this planet. Bowling is no exception. If the bowling ball were thrown up out of the hand of a bowler, gravity would bring it down to the floor. If the pin and bowling ball fell at the same time from the same height they would hit the ground at the exact same time. This is one main reason everything deals with physics. The acceleration would be in a slowing down state or deceleration. It would decelerate because of the small friction f rom the ball to the floor. The opposition to the motion, called friction is the ball touching the floor. In bowling this is a great factor because it is used to spin into the pins in an exact location. As soon as the ball makes contact with the lane's surface, friction comes into ... ...f the physics world that most don’t take time to think about. In this sport it was noticed the many applied physics that happens. It includes the motions, the ways that Newton’s laws apply, the different momentums, and the energy. Some of the other physics topics include torque, pendulum theory and collisions. This sport as well as anything else is affected by physics. Even though physics is involved and it might not seem so complicated to hit down pins but physics affects everything so it would take a lot of luck and skill to not mess anything up with the physics. Works Cited: 1.Internet website, http://kingfish.coastal.edu/physics/projects/2000_Spring/bowling/ by Colleen Bryan Emily Butsic Bo Hu Adrienne Metz. 2.Book, â€Å"A World View fourth edition,† by Kirkpatrick and Wheeler, 1992. 3.Article, â€Å"The Physics of Bowling,† by Tim Burgess, vol.34, May 1996. The Physics of Bowling Essay -- Physics Bowling Papers The Physics of Bowling The definition of physics by some may be the science that deals with matter, energy, motion, and force. Therefore everything in the world uses physics in some way or another. One of the numerous things that deal with physics is bowling. Some of the major parts of physics bowling has is the motions, the ways that Newton’s laws apply, the different momentums, and the energy. Other physics topics include torque, pendulum theory and collisions. In the motion of bowling many things are going on that apply to bowling. There is displacement, velocity, gravity, and acceleration. There is also an opposition to motion, which is friction. The displacement would be the bowling ball going from the position of leaving the hand to where it rests at the back by the pin collector. The velocity of the ball would include the speed and direction of the ball. The equation to find the velocity of the ball would be the displacement divided by the time taken to reach the destination. Gravity affects everything on this planet. Bowling is no exception. If the bowling ball were thrown up out of the hand of a bowler, gravity would bring it down to the floor. If the pin and bowling ball fell at the same time from the same height they would hit the ground at the exact same time. This is one main reason everything deals with physics. The acceleration would be in a slowing down state or deceleration. It would decelerate because of the small friction f rom the ball to the floor. The opposition to the motion, called friction is the ball touching the floor. In bowling this is a great factor because it is used to spin into the pins in an exact location. As soon as the ball makes contact with the lane's surface, friction comes into ... ...f the physics world that most don’t take time to think about. In this sport it was noticed the many applied physics that happens. It includes the motions, the ways that Newton’s laws apply, the different momentums, and the energy. Some of the other physics topics include torque, pendulum theory and collisions. This sport as well as anything else is affected by physics. Even though physics is involved and it might not seem so complicated to hit down pins but physics affects everything so it would take a lot of luck and skill to not mess anything up with the physics. Works Cited: 1.Internet website, http://kingfish.coastal.edu/physics/projects/2000_Spring/bowling/ by Colleen Bryan Emily Butsic Bo Hu Adrienne Metz. 2.Book, â€Å"A World View fourth edition,† by Kirkpatrick and Wheeler, 1992. 3.Article, â€Å"The Physics of Bowling,† by Tim Burgess, vol.34, May 1996.

My Career Objective

In my first employment, I want to be employed as marketing assistant for a drug Maker Company. Being a fresh graduate with a pharmaceutical degree from the university, I am quite excited to be in the marketing department because the job seemed to fit to my course (a Bachelor’s Degree in Pharmaceutical). The job that I want to have includes the sale of pharmaceutical products, taking orders from the customers, and developing business relations with both new and old customers. Target Market My main target market is the Pharmaceutical Companies in India, which manufacture pharmaceutical products and drugs for export to South East Asia. Most of the drugs are sold over the counter, as these drugs are common medicines for fever, cough, and flu. There are also generic antibiotic medicines such as cefalexin and amoxicillin that are sold cheap. At present, China, Indonesia, Thailand, Philippines, and Malaysia are the emerging pharmaceutical manufacturer and exporter in the region. In order to demonstrate my desire to work in pharmaceutical company in India, I checked for job opportunities in some pharmaceutical companies in India. See appendix A or Job announcements samples from India. This job opportunity requires a minimum of one-year experience but I believe that if the credential is impressive, it may not pose problem. Personal Features To prove my worth to the position, I would like to emphasize five features that describe me as a person, and as a professional. First, I posses a solid communication skills both in person and by phone which I developed during my student days as public information officer in our school organ which   I believe will benefit the marketing department. Second, I am proficient with Macintosh, PC, and spreadsheet applications; I am particularly gifted with technical skills that give me an advantage over other applicants. Third, I can effectively manage important aspect of business operations, including inventory management and account maintenance. I acquired knowledge in this area through my on-the job training at my grand father’s business firm. Fourth, I have a flexible character and I cab easily get along with others. This enables me to have the ability to organize and motivate others. I believe this is important in the work place because working in harmony with others builds teamwork, which is important in creating a productive work environment. Above all these, is that I posses a strong work ethic and enthusiasm to learn. I believe that with all this features I can help the company to boost its sales performance as well as in advancing the company’s competitive advantage. What makes me different from others? I understand that there are many applicants to the position I desired, but I would like to point out my advantage with others, which make the difference. Aside from the five features that I have which I mentioned above, I am a jolly person. I have strong sense of humor and I could easily crack jokes that can uplift the guts of my peers. I am willing to do some technical trouble shooting if necessary, even to the extent of working on twenty-four hours to ensure effective communication facility or to meet the necessary requirements. I am aware that this is not the kind of job I am applying but if I need to do so, I will be willing. My communication skills would be an advantage too. I have communications with a lot of important personality that could provide an important business link. If I will be given the chance to be part of the marketing team, I could work with these important people to advance the companies’ interest and goals. Salary Expectation With regard to the salary, I will not be so particular about how much as long as it is respectable. I mean not really high but not very low also. But this depends on the company situation. If the company is multi-national I would expect salary that will commensurate to my worth in the company. I believe this is justifiable because multi-national company earns enormous profits and it is not a sin to demand a fair share.   I will not demand higher salary, but just the appropriate compensation based on the prevailing salary standard. However if necessary, I am willing to accept lower salary if that meant developing good experience for a better job two to three years from now. I do not think demanding a higher salary at this point is unjustifiable in the sense that I have not proven yet my worth. I need to prove all that I have stated in my resume. The salary that I expect is the current minimum wage for professional. Promotional strategy (why I want This Job) I have learned about the job opportunity in India from the internet at Yahoo job search India. The specific location of the company is in Mumbai. I want this job because I have particular interest in pharmaceutical related work. Besides this is my field of expertise and it would be more comfortable for me if will be in this fieldwork. Perhaps what attracts me to this kind of work is that since childhood, I was fascinated by the pharmacist in their beautiful uniform that I used to see at a nearby drugstore in our neighborhood. I choose to work in India because I want to experience a new culture. India is one of the fastest growing economies in Asia and considered to one of the emerging hegemonic economy after the United States. What do I see my self doing in five years I would say that I will still be in this company five years from now but perhaps as the marketing head of the company’s marketing department. I am quite sure that both my technical and communication skills will be even more developed during the course of my employment and I expect that I can acquire new skills, particularly in management, that could provide me the opportunity for career improvement. I am confident that so long as the top management recognized my worth and justly compensate my effort, I can perform my best and remain loyal to the company’s goals and mission. What do I see my self in ten years? As I mentioned earlier, so long as the company recognized my worth and justly compensate my effort, I will remain loyal to the company and perform my best. In this case I see my self-being in the top management team or perhaps a branch manager in either India or in particular Asian country. My loyalty to the company will remain until the time of my retirement. The company’s trust and confidence in me as well as the fare recognition of my initiative, my effort, and my skills and experience with the company will be the motivating factor behind my commitment. Distributional Strategy I will make the employer aware of the benefit that I can provide through my resume with attached application letter. I must prepare an impressive resume that presents my outstanding qualification specified in terms of acquired skills, personal attributes, co—curricular and community involvement, awards, and most importantly my work experience.   By means of these points of competencies, I can generally pinpoint my advantages over other applicants; and in the same way, the employer can easily determine why he has to select me from the many choices he has. Basically, resume and application letter is the best option for all application in making that first point of contact with the employer.   This is the best way to make personal impression because this reflects your sincerity and personality. Appendix A JOB ANNOUNCEMENT FROM THE INTERNET Marketing Executive Company Profile: The company is into manufacturing of High Quality Pharmaceutical, Chemicals, Cosmetics, Beverages & Food Industries Machineries & Equipments. Job involves : The job will include sale of pharmaceutical Machinery, follow up with client, Taking orders from clients, overall business development of the old and New clients as well. Experience : 1 – 3 yrs Job Category : Marketing / Sales Medical Marketing Associates Company Profile : A Pharmaceutical Group of Company Job involves : Post Graduates/ Graduates in Medicine/ Pharmacy/ science. Experience : 1 – 2 yrs Job Category : Pharmaceutical/ Biotech Keywords – Medical Marketing Associates More Information Salary : Upto Rs 1.75 lacs p.a Location : Ahmedabad, Bangalore, Jaipur Date Posted : Source: http://in.jobs.yahoo.com/jobs.php?jc=Pharmaceutical Work Cited Henry, Merrit. Constructing an Impressive Resume.   The Jamaica Observers.   April 22, 2007. http://www.jamaicaobserver.com/news/html/20070421T210000-0500_122057_OBS_CONSTRUCTING_AN_IMPRESSIVE_R_SUM__.asp. Yahoo Job Search in India. http://in.jobs.yahoo.com/jobs.php?jc=Pharmaceutical